-
Precautions for pneumatic cylinder Installation
For example, when the pneumatic cylinder is actuated, please pay attention to the direction of actuation. Do not put your hands within the actuating range of the cylinder. Wires such as the wires of the sensor switch, etc., please check properly if there is any damage, strong pull, twist, etc. Defle...
Jun 10,2022 Industry News -
What should be paid attention to in the use of the micro pneumatic cylinder
Different types of micro pneumatic cylinder have different working principles, and the operation methods are naturally different when they are used. The rotary cylinder is one of the special cylinders. The complexity of the use of cylinders is not only the operation method, but also various other fa...
Jun 02,2022 Industry News -
Solenoid valve installation attention
Solenoid valve installation attention 1. When installing, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in places where there is direct dripping or splashing. The solenoid valve should be installed vertically upwards; 2...
May 24,2022 Industry News -
The difference between Pneumatic solenoid valve and electric valve
The difference between Pneumatic solenoid valve and electric valve 1. Switch form: The solenoid valve is driven by a coil and can only be opened or closed, and the action time is short when switching. The electric valve is generally driven by a motor. It takes a certain amount of time to complete th...
May 20,2022 Industry News -
Working principle of pneumatic control valve
Installation principle of pneumatic control valve: (1) The installation position of the pneumatic control valve is required to have a certain height from the ground, and there must be a certain space above and below the valve to facilitate the disassembly and repair of the valve. For regulating valv...
May 13,2022 Industry News -
What is the test procedure to verify the rated pressure of the filter regulator?
What is the test procedure to verify the rated pressure of the filter regulator? If only a single rated pressure is set for the entire product, this test shall be carried out on 3 random samples; if the input and output parts are respectively set with their respective rated pressure values, 6 random...
May 06,2022 Industry News
Copyright © Ningbo Lida Pneumatic Complete Co., Ltd. Rights Reserved.
