nblida.com
ENCNES

DOWNLOAD SAMPLE

News

How to repair the air leakage of the automatic reciprocating cylinder?

Update:13 Oct 2022
Summary:

The automatic reciprocating cylinder may fail during wo […]

The automatic reciprocating cylinder may fail during work, and the common fault of the cylinder is the cylinder leakage. There are many reasons for the cylinder leakage. There are also leakage in the cylinder and leakage outside the cylinder. The following is the answer to why the automatic reciprocating cylinder is always Air leak, how to repair the cylinder leak.

1. The cylinder block and cylinder head of the automatic reciprocating cylinder are not properly fixed and sealed. The sealing ring should be replaced in time.
2. The piston rod of the automatic reciprocating cylinder and the reciprocating movement of the cylinder head are poorly sealed. If the piston rod is scratched or the piston rod is eccentrically worn, the piston rod should be replaced in time; if air leakage is caused by the quality of the sealing ring, the sealing ring should be replaced in time.
3. The regulating valve and one-way valve at the buffer device of the automatic reciprocating cylinder leak. Check carefully and replace the leaking regulating valve or check valve in time.
4. The fixing screw of the automatic reciprocating cylinder is loose. The screws should be tightened in time as required.
5. There are impurities between the piston rod of the automatic reciprocating cylinder and the guide sleeve. The impurities between the piston rod and the guide sleeve should be checked and cleaned in time, and the dust ring should be added.

0

Recommended Products

KHSV Series Slide Valve
LQW Customized Series Cylinder
MA、MAL Installing Accessory
LD4 Series Solenoid Valve,Pneumatic Control Valve