Filter Regulator Lubricator Combination: AC and BC Series Air Treatment Units
Time:
2026-11-16 18:06
Author:
We at Ningbo LIDA make the Filter Regulator Lubricator Combination for pneumatic lines that need clean, regulated and lubricated air in one compact unit. The product page lists the AC and BC series, five models from AC1500 to BC4000, and the matching filter, regulator and lubricator elements. This article explains how the combination works and what a buyer should check before an order.
What an F.R.L Combination Does
Compressed air leaves a compressor with dust, water and oil carried with it. A filter removes the solid particles and the condensed water, a regulator holds the downstream pressure at a steady value, and a lubricator adds a fine oil mist for air tools and cylinders. An F.R.L combination puts these three functions in one body, so the air is conditioned before it reaches the machine.
The order matters. Air should be filtered and regulated before it is lubricated, because dirt and a changing pressure disturb the oil mist. The combination also saves space and pipe joints on a panel, and it gives the maintenance team one drain point and one pressure gauge instead of three separate devices.
The AC and BC Series at a Glance
The page lists five models. AC1500 and AC2000 use G1/8 and G1/4 ports with a 15cc filter cup and a 25cc oil cup, and the two models weigh 0.7kg. BC2000, BC3000 and BC4000 use G1/4, G3/8 and G1/2 ports with a 60cc filter cup and a 90cc oil cup, and these models weigh 0.9kg. A larger port and bowl suit a higher flow demand.
The working range on the page is 0.05 to 0.85MPa for adjustable pressure, 0.95MPa for maximum adjustable pressure and 1.5MPa for ensured pressure resistance. The filtering element roughness is 40 micron, the operating temperature range is 5 to 60 degrees Celsius, and the suggested lubricating oil is ISO VG32 or the same grade.
The body is aluminum die casting, the container cup is PE, and the protective cup cover is iron on the models that have it. The page also gives the composing elements for each model. The AC1500 uses an AF1500 filter, an AR1500 regulator and an AL1500 lubricator, while the BC series uses BF, BR and BL elements in the matching size. That list lets a buyer keep the element code on file for a correct replacement.
Choosing the Right Size
The first check is the air demand of the machine. A small cylinder or a single air tool can run on an AC1500 or AC2000 with a G1/8 or G1/4 port. A larger panel with several tools needs a BC model, a bigger bowl and a larger port, because a small port adds pressure drop and a small bowl fills with water sooner.

The second check is the working pressure and the temperature. The regulator range and the temperature range on the page should cover the actual line. The buyer should also confirm the thread standard used on the existing pipe, because a G thread and an NPT thread are not interchangeable without an adapter.
The third check is the oil. The lubricator is made for ISO VG32 or the same grade, and the buyer should not fill it with an unknown oil. The drip rate should be set for the tools in use, and the oil feed cup should be checked at the start of a shift. A dry lubricator can wear a cylinder seal, and too much oil can carry into the exhaust.
Installation and Maintenance
The combination is normally mounted vertically with the bowl down, so the water collects at the drain and the oil feeds by gravity. The air should flow in the direction of the arrow on the body, and the unit should have enough space below the bowl for the drain and above the knob for adjustment. Drain the filter cup before it fills, clean or replace the element when the pressure drop rises, and use a cleaning agent that is compatible with the PE cup and the iron cover.
Quality and Company
Ningbo LIDA Pneumatic Complete Sets Co., Ltd. was founded in 1994 and works on pneumatic execution, direction control and air source treatment. The company states that it holds ISO9001:2015 quality management system certification, United Kingdom QEC certification and CE certification, and that its products are exported to Europe, America, the Middle East and Southeast Asian countries.
The company also states that its products are used in knitting, medical, food, packaging, petrochemical, metallurgy, coating and vehicle equipment, and that it has taken part in national standard work for direction control valves and pneumatic pipe joint test methods. That background is useful when a buyer needs a standard part and a stable supply more than a special design.
Next Step
To request a quotation, send the model or the port size, the working pressure, the air demand, the oil type and the quantity. We will confirm the series, the bowl size and the element code that fit the line. A sample and a data sheet can be discussed for a qualified application. The company address is Area 8, Zhongxing East Road, Xikou, Ningbo, Zhejiang Province, China 315502, and the foreign trade department can be reached at +86-574-88846388.
Recommended News